Tech Hack

5 ways to fix an unreadable flash drive

Flashdisk not read on laptop or PC? Check out the following explanation to find out the cause and how to fix an unreadable flash!

An unreadable flash drive can make you upset, especially if this problem occurs at critical times. Have you experienced it too?

Flashdisk is one of the most frequently used important file storage places today. No wonder this little thing is always well taken care of.

Unfortunately, the flash may not be detected on a PC or laptop because of a dangerous computer virus or other. This must also be a problem that you have often experienced.

Well, in this article, ApkVenue will explain the causes and how to solve unreadable flash which you can easily try. Listen carefully, yes!

Causes and How to Overcome Unreadable Flashdisk

Flashdisk not detected is certainly caused by several factors. So, you have to know the cause so you can deal with it in the right way.

Well, here's an explanation of the causes and how to fix an unreadable flash that you should try, gang!

Reason Flashdisk Unread and Detected

Before going any further, it would be nice for you to know first some of the reasons why the flash cannot be read on TV, HP, laptop or PC.

Of course, every problem that causes damage to the flash drive has its own way of dealing with it, you know. So, make no mistake, okay!

Starting from physical problems, virus attacks and malware, to those related to software Jaka has reviewed in full below.

1. Port Dirty USB or Pendrive Connector

The first thing you can do is check physical condition, good at port USB on a PC or laptop, as well as a flash connector.

If you usually put your flash drive, PC, or laptop in a dirty place, it is certain that port Your USB is in the dust, gang.

Dust covering the connector will most likely affect the performance of the flash drive and make the flash unreadable in Windows 10, 8, and 7.

2. Driver USB Problem

Then it could also be because drivers Problematic USB, for example when the USB is not read even though it is connected to a PC or laptop.

Previously, you can check drivers USB via Device Manager and choose an option Universal Serial Bus controllers inside it.

Although there are not many flashdisk problems detected but not read because of this cause, you can still try this method, really!

3. Viruses and Malware

Apart from physical problems, the flash is not detected at all, it can also be caused by: virus attack and malware, gang.

This can also be triggered by the use of a flash that is often connected to any PC or laptop alternately and with a fairly high intensity.

So, the most effective way is to remove the virus using an antivirus application that is widely available for free.

4. Fake Flash Drive

Finally, it could be that the flash disk problem is detected but does not appear this is caused because you are using a flash drive fake flash drive, gang.

In this case, you have to be more observant in choosing the best quality flash. Do not believe the cheap prices from famous flash brands.

Because, it could have only been used a few times, uh, the flash can no longer be used. So sad, right?

How to Fix an Unreadable Flashdisk

After knowing some of the causes flash drive unreadable on PC, now you will know how to fix it, here!

Well, how to fix a flash drive whose data is not legible, you can immediately see in full in the explanation below, yes!

1. Clean Port USB and Pendrive Connector

As in the previous review, the biggest possibility of unreadable flash data on a cellphone or laptop is because it is dirty or has dust in it.

For problems like this, there are some easy steps that Jaka recommends for you to do first, including:

  • clean up port USB and USB connectors use a cleaning brush to remove dust particles that are covering.
  • Clean the brass plate on flash drive by using a rubber eraser (if the USB connector is an open type).
  • Then try to connect flash drive on another PC/laptop. Here to test, whether flash drive damaged or even a problematic PC / laptop.

2. Scan with Antivirus Software

If this problem is caused by a virus or malware, then the first thing you can do is do scan with software anti Virus.

How to fix an unreadable flash without formatting is to remove the virus shortcuts so that the flash is free from harmful viruses.

In addition, there are also some recommendations for the best PC antivirus applications that you can try to clean the data on the flash on a regular basis.

3. Reinstall USB Drivers

You can also do how to fix an unreadable flash by checking and doing the following: reinstall on drivers USB used.

To reinstall drivers USB on a PC or laptop, you can do a few easy steps as follows:

  1. Connect flash drive which is unreadable with a PC or laptop.

  2. right click on the Windows logo in the lower left corner of the screen and select options Device Manager.

  3. Wait until the Device Manager window opens as in the image below.

  1. In the Device Manager window, look for options Universal Serial Bus controllers.

  2. Open menu dropdown and look for a device named USB Mass Storage Device which will be marked with a yellow warning if an error occurs.

  1. On USB Mass Storage Device, you just right click and select options Uninstall Device. If it appears pop-up warning, you just click Uninstall just.

  2. After the process is complete, you can unplug and re-plug the flash for immediate use. You can alsorestart PC or laptop first, gang.

4. Using Command Prompt (CMD)

Although fairly old school, repair the flash with CMD or Command Prompt it was still very effective. You can find out if the flash drive is still healthy or not.

In addition, this method will also be very useful to avoid data lost or deleted on the flash.

You can follow the tutorial how to solve unreadable flash with CMD more below.

  1. Connect the flash on your PC or laptop.

  2. open Command Prompt by clicking on the Windows logo and typing "command prompt".

  3. Select Command Prompt and wait for the window to open as shown below.

  1. Enter command chkdsk G: which means checking disc (check disk) on drive M:.

  2. Letters on drive must be adjusted to what is displayed by the flash on your PC or laptop.

  1. After entering the command, then press Enter.

  2. Command Prompt will provide detailed information about the condition of the flash, such as: label volume, capacity, and other information.

  1. If the system detects an error on your flash drive, you will see results something like the following:

photo source: kangtokcomputer

5. Using Computer Management

You can be sure that the alias connection port Your USB is fine and other USB devices can be connected.

Here you can check if the storage device is a flash memory in your flash it still works or not, gang.

Now, Computer Management allows you to do scanning, repair, to format drive according to your needs to overcome the flash read but does not appear.

You can try how to overcome flash drive unreadable in Disk Management with the following steps.

  1. Connect the flash on the port USB available on your PC or laptop.

  2. Open Computer Management settings by right-clicking on the Windows logo in the lower left corner and selecting options Computer Management.

  3. Wait for the Computer Management window to appear on the screen.

  1. On tab on the left, you just choose an option Disk Management.

  2. Make sure your flash is detected, for example JalanTikus (G:) with the Removable mark and also with its capacity.

  1. Right click on the flash drive and select an option Change Drive Letter and Paths...
  1. In the Change Drive Letter and Paths window... you click the button Change...
  1. On the menu dropdownAssign the following drive letter: You just select the available letters. If you have, you just click OK.
  1. Make sure the name drive on the flash has changed according to the latest settings. If the flash still can't be used, you can format it via Disk Management by right-clicking and selecting options Format...
  1. In the Format window, you just need to fill in the name of the flash drive, type file system and size to be allocated. If so, just click OK.

  2. Wait for the format process to complete and your flash drive is now in like new condition again.

That's causes and how to solve unreadable flash and detected on your PC or laptop. You can try the steps above to make sure flash drive you are really physically damaged or not.

Do you have any other solutions that are worth a try, gang? Well, don't hesitate to write in the comments column below, OK!

Also read articles about Flashdisk or other interesting articles from July Andrian.

$config[zx-auto] not found$config[zx-overlay] not found